Eureka Optima Vacuum is one of Eureka vacuum’s 430 series. This vacuum has a lot of attractive features. It works perfectly on carpets and bare floors, it is easy to carry since it weighs only 12 pounds, and it can clean pet hair effectively too.

However, it goes without saying that the performance of this vacuum will begin to reduce if it is not maintained correctly.

This is why we have brought you this article on how to wash Eureka Optima Vacuum Cleaner Filters. These tips will help.

Eureka Optima Vacuum Filter Maintenance

• Unplug the Vacuum

First, switch your vacuum’s power off, and remove the device from where it is connected to a power source. Electricity can be dangerous and unplugging your unit first is a way to prevent any harm to both you, and your Eureka Optima Vacuum.

• Dislodge the filter

You need to inspect the filter so that you can ascertain whether or not your vacuum cleaner needs to be washed. To do this, press the release cup button and dislodge the dust cup from the rest of the unit. In an anti-clockwise direction, twist the lid of the dust cup that is connected to the filter. Then, lift the cover and the attached filter out of the cleaner.

• Remove Dirt from the Filter

To do this, push the filter latch. When the filter is out, hold the filter over a garage can and shake it to get rid of any dust or debris which may be clinging to it. Some stubborn pieces may remain stuck to the filter, you can use your fingers to remove them. Ensure to do this outside, so you don’t get dirt all over your house.

• Wash the Filter

There are washable dust cup filters. Take the Filter, filter tube and screen, and wash gently but thoroughly. You should use warm water to clean the filter, but do not make use of any soap or abrasive material as this can damage the filter.

• Put the Filter Back in Place

When you’re done washing the filter, let it dry completely before placing the filter back into the dirt cup lid. Afterwards, slip the filter back into the vacuum and turn the cover. This time, turn the lid in a clockwise direction and make sure it is locked into place. It will take the filter up to 24 hours to dry completely.

How Often Should You Wash Your Eureka Optima Vacuum Filter?

It is advised that you clean and wash your filter after every 3 to 4 times of use. If you use your vacuum daily, then it is recommended that you change it once a week. If you use yours once a week, you should wash the filter once every month.

Every filter has its own specific lifespan. Generally, though, a filter starts needing a replacement between 3 to 6 months of use. However, everything still boils down to how often you use your vacuum. Vacuums that are used frequently tend to need it filters replaced more often than when it is used only occasionally. You could extend the life of your filter by using the cleaner to clean just what it is meant to clean. Using it on the wrong dirt will only serve to weaken the filter and make it get damaged sooner than usual.

While you wash, avoid scrubbing your filter between pleats, or washing with soap. Also, when trying to dry your filter, do not place it on a hot surface directly. Ensure that the filter dries totally before putting it back into the vacuum. Typically, it’ll take between 24 hours and 48 hours for the filter to dry.

Conclusion

When it comes to cleaning your home, Eureka vacuum cleaners do a great job of it. However, maintenance plays a significant role in how effective it works. Use our tips on how to wash Eureka optima vacuum cleaner filter to prevent any decline in functionality.